The Effect Of Compaction Temperature On Marshall Parameters Of AC-WC Asphalt Mixtures With Graphene Additives

Penulis

Naya Fadillah Nasution Universitas Malikussaleh
Maizuar Maizuar Universitas Malikussaleh
Said Jalalul Akbar Universitas Malikussaleh
N Usrina Universitas Malikussaleh
Burhanuddin Burhanuddin Universitas Malikussaleh

DOI:

https://doi.org/10.55616/prince.v4i3.1049

Kata Kunci:

AC-WC, Compaction Temperature, Graphene, Marshall, Public Works

Abstrak

This study aims to determine the effect of compaction temperature variation and graphene addition on Marshall parameters in AC-WC asphalt mixtures. The issues raised are premature damage to asphalt layers due to compaction temperatures that do not meet specifications and the lack of studies on the effect of graphene with compaction temperature variation on AC-WC. The materials used include coarse aggregate, fine aggregate, filler, Portland cement, 60/70 penetration asphalt, and graphene with variations of 0.01%–0.05% by weight of the mixture. The compaction temperatures tested were 110°C, 120°C, 130°C, 140°C, and 150°C. Testing was conducted in accordance with the 2018 Revised II General Specifications for Road Construction using the Marshall method. The results showed that adding 0.01% graphene at a compaction temperature of 140°C produced the best performance with a 19.55% increase in stability, yielding a stability value of 1711.367 kg. Density and MQ increased, while VMA, VIM, and flow decreased due to the addition of graphene, but still met the specification range. The decrease in these values demonstrates that graphene functions effectively in asphalt mixtures, improving porosity and strength compared to standard asphalt. At compaction temperatures of 110°C and 120°C, the VIM values exceeded the maximum limits of 9.67% and 7.05%, respectively. This increase could lead to excessive voids in the asphalt, making graphene a viable solution for asphalt construction.

Referensi

[1] D. Lagaligo, L. B. Said, and A. Alifuddin, “Pengaruh Temperatur Pemadatan pada Campuran Beton Aspal (AC-WC) dengan Bahan Tambah Karet Alam terhadap Ketahanan Deformasi dan Kuat Tarik Tidak Langsung,” Jurnal Konstruksi: Teknik, Infrastruktur dan Sains, vol. 1, no. 11, pp. 23–36, 2022.

[2] Y. Pane and D. S. Pasca, “Analisa Semen Portand Dan Abu Batu Sebagai Filler Dengan Marshall Dan Durabilitas Aspal Hotmix (AC–WC),” SKYLANDSEA PROFESIONAL Jurnal Ekonomi, Bisnis dan Teknologi, vol. 1, no. 2, pp. 86–95, 2021.

[3] V. Dotulung, L. G. Lalamentik, and S. C. N. Palenewen, “Analisis Variasi Gradasi Agregat Gabungan Terhadap Karakteristik Campuran Aspal Panas Pada Lapis Aspal Beton (AC-WC),” TEKNO, vol. 21, no. 85, pp. 1153–1161, 2023.

[4] M. Mesias, “Analisa Pengaruh Penggunaan Filler pada Perkerasan Jalan (Ac-Wc) terhadap Nilai Marshall,” 2022, Accessed: Mar. 19, 2025. [Online]. Available: https://repositori.uma.ac.id/jspui/handle/123456789/19844

[5] S. Sukirman, “Beton Aspal Campuran Panas. kedua,” Bandung: Institut Teknologi Nasional, 2016.

[6] B. Marga, “Spesifikasi umum 2018,” Direktorat Jendral Bina Marga, vol. 2010, pp. 1–6, 2010.

[7] S. Annura, H. Hamzani, E. Maulani, and B. Burhanuddin, “Pengaruh Penambahan Graphene Sebagai Bahan Tambah Aspal Terhadap Kinerja Campuran Ac-Wc,” Sisfo: Jurnal Ilmiah Sistem Informasi, vol. 8, no. 1, pp. 161–181, 2024.

[8] R. Wijaya, G. Andersan, S. Permatasari Santoso, and W. Irawaty, “Green reduction of graphene oxide using kaffir lime peel extract (Citrus hystrix) and its application as adsorbent for methylene blue,” Scientific reports, vol. 10, no. 1, p. 667, 2020.

[9] F. A. Shilar, S. V. Ganachari, V. B. Patil, T. M. Y. Khan, N. M. Almakayeel, and S. Alghamdi, “Review on the Relationship between Nano Modifications of Geopolymer Concrete and Their Structural Characteristics,” Polymers, vol. 14, no. 7, Art. no. 7, Jan. 2022, doi: 10.3390/polym14071421.

[10] M. Apriansyah, A. G. Wangsa, M. Ukkasya, F. Fadlun, and N. Anisah, “STUDY LITERATUR: GRAPHENE, NANO TEKNOLOGI SEBAGAI MATERIAL KONSTRUKSI MASA DEPAN,” Bearing: Jurnal Penelitian dan Kajian Teknik Sipil, vol. 9, no. 1, pp. 1–9, 2024.

[11] Y. Li, S. Wu, and S. Amirkhanian, “Effects of graphene oxide on asphalt binders,” in Nanotechnology in Eco-Efficient Construction, Elsevier, 2019, pp. 203–226. Accessed: Mar. 26, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/B9780081026410000104

[12] X. Zhang, J.-X. He, G. Huang, C. Zhou, M.-M. Feng, and Y. Li, “Preparation and characteristics of ethylene bis (stearamide)-based graphene-modified asphalt,” Materials, vol. 12, no. 5, p. 757, 2019.

[13] W. S. B. Dwandaru, R. I. W. Wijaya, and L. D. Parwati, “Nanomaterial Graphene Oxide Sintesis dan Karakterisasinya.” UNY Press, 2019.

[14] Y. Maulana, S. Sukirman, and R. Zurni, “Studi Kadar Aspal Optimum Menggunakan Alat Marshall dan Alat Percentage Refusal Density,” RekaRacana: Jurnal Teknil Sipil, vol. 2, no. 1, p. 26, 2016.

[15] A. Susilowati and E. Wiyono, “VARIASI SUHU PEMADATAN PADA CAMPURAN BETON ASPAL MENGGUNAKAN BAHAN TAMBAH ANTI STRIPPING,” cmj, vol. 1, no. 1, pp. 12–20, Mar. 2019, doi: 10.32722/cmj.v1i1.1324.

[16] “SNI ASTM C136-2012 Metode Uji untuk Analisis Saringan Agregat Halus dan Agregat Kasar.”

[17] “SNI 03-4804-1998 Metode Pengujian Berat Isi dan Rongga Udara Dalam Agregat.”

[18] “SNI 1969-2016 Metode Uji Berat Jenis dan Penyerapan Air Agregat Kasar.”

[19] “SNI 1970-2016 Metode Uji Berat Jenis dan Penyerapan Air Agregat Halus.”

Unduhan

PDF (English)

Diterbitkan

2025-11-27

Cara Mengutip

Nasution, N. F., Maizuar, M., Akbar, S. J., Usrina, N., & Burhanuddin, B. (2025). The Effect Of Compaction Temperature On Marshall Parameters Of AC-WC Asphalt Mixtures With Graphene Additives. Jurnal Perencanaan Dan Penelitian Teknik Sipil, 4(3), 670–683. https://doi.org/10.55616/prince.v4i3.1049